NEPTUNE BR/BT Series Bromine Feeder

Purpose 

Neptune Bromine/By-Pass Feeders are a convenient and efficient way to properly feed solid biocides or other corrosive water treatment chemicals. These units easily handle ball, stick, tablet and other forms of bromine. Vinylester resin (Fiberglass) body tanks are superior to standard steel by-pass feeders for shot feeding corrosive chemicals.

BR series: Feeders offer side inlet and outlet connections and a top
fill cap. Fiberglass body has (2) threaded side connections and (1) 2 1/2″ or 4″ top opening with threaded gasketted closure.

BT series: Feeders offer a bottom inlet with a full drain and one or
two side outlets in additional to the top closer. These unites are recommended for Bromine Compounds. Fiberglass body has (2) threaded side connections, (1) threaded bottom connection and (1) 2 1/2″ or 4″ top opening with threaded gasketted closure.

Features/Benefits

  • Feed rates from 2-1/2 through 230 lb. per day.
  • Bottom inlet and drain connection.
  • Top opening with threaded, gasketted closure.
  • Rated to 150 psi at 65 Celsius (150°F).
  • Optional PVC piping kits include strainers and all required fittings.
    BSP fittings available upon request.
  • Optional flow indicators in four ranges.
  • Pressure relief valves and solenoid valves optional.

BT series TANKS

Feeders offer a bottom inlet with a full drain and one or two side outlets in additional to the top closer. These unites are recommended for Bromine Compounds. Fiberglass body has (2) threaded side connections, (1) threaded bottom connection and (1) 2 1/2″ or 4″ top opening with threaded gasketted closure.
Tanks rated to 150 psi at 65 Celsius (150°F). (Note: Model BT-420, 120°F max.)

Optional Piping Kit 

PVC threaded fittings for operation to 120 psi at 100°F. Each Kit contains: two strainers, three ball valves, two tees, two 90° elbows, required nipples and plugs.

Flow Indicator

5% accuracy, Polysulfone and CPVC with 316SS float.
Male pipe connections. Rated to 150 psi at 120°F.

Funnel

Polyethylene funnels are available in two sizes to fit the 2-1/2″ or 3-3/4″ top opening of the bromine feeder body. A third funnel is offered which screws onto 5-gallon plastic pails with
threaded tops.