Downloadable content
Chemical Feed Pump Control
- Product Details
- Specifications
- Diagram
Chemical Feed Pump Control with Flow-Switch
The CHEMTROL® feed pump controller is a stand alone interface module that automatically actuates a chemical feed pump when primary bulk fluid begins to flow.
This module can be used in isolated stand alone systems or part of large complex systems. Designed for metering and/or adding chemicals in both continuous and batch fluid systems such as:
- Well Water
- Cooling Towers
- Drinking Water
- Metal Plating Make Up Solutions
- Waste Fluid Processing
- Boiler Treatment Additives
Chemical Feed Pump Control with Flow-Switch
| Working Pressure | 250 psi max. continuous |
| Working Temperature | 82ºC max. continuous |
| Wetted Materials | Body and Bushing: Noryl® (PP0) (10% glass fibers) Blade: 316 stainless steel Seal: Epoxy |
| Electrical Switch | Feed pump motor maximum contact ratings |
| Voltage | 240VAC, 50-60 Hz |
| Rating | IP67 |
| Load Type | Resistive 10A |
| Motor | 1/3 hp |
| Switch Contact | Single pole normally open |
NOTE: All circuitry is potted in flexible urethane for maximum long term shock, thermal, stress, and moisture protection.
| Flow Line Size | Flow Set-point l/m on | off |
|---|---|
| 3/4" | 4 on | 3.5 off |
| 1" | 5 on | 4.5 off |
| 1 1/2" | 13 on | 11 off |
| 2" | 22 on | 20 off |