BLACKLINE Series
- Blackline MD
- Blackline Pro
- Specifications
- Video MD-Series
- Video Pro-Series
BLACKLINE Series MD
Max Feed: 26 – 500 LPH
Max Pressure: 75 – 150 PSI (5-10 bar)
The BLACKLINE Series MD is a motor driven, spring return mechanical diaphragm metering pump for precise and accurate metering control. With many standard features, the Series MD includes oil lubricated ball bearings in a die-cast aluminum housing, long life reinforced PTFE diaphragm, micrometer style stroke length adjuster and many liquid end material options to suit any application.
Nine distinct models are available, having flow capabilities to 500 LPH and pressures to 150 PSI (10 BAR), with a standard turndown ratio of 10:1 or up to 100:1 with the optional VFD Vector. Metering performance is reproducible to within ± 2% of maximum capacity.
Standard Features
- Liquid End Materials – GFPPL, 316 SS & PVDF.
- Rugged double-sided PTFE faced, long life diaphragm.
- Oil lubricated ball bearings in a die-cast aluminum housing.
- Manual micrometer style stroke adjustment; 10:1 turndown or up to 100:1 with the optional VFD Vector.
- Standard NEMA 56C or IEC71 motor frames available.
Optional Features
- Variable Frequency Drive for Automatic Control.
- Fully Scalable 4-20mA, 0-10VDC signals.
- NEMA 4X Enclosure.
- ATEX Group II, Category 3 – Zone 2/22 for non-flammable liquids with proper motor selection.
BLACKLINE Pro
Max Feed: 26 – 500 LPH
Max Pressure: 75 – 150 PSI (5-10 bar)
The Blackline Pro is based on Pulsafeeder’s proven mechanical diaphragm pump technology with the addition of a variable speed drive controller. The unit comes with ten different operating modes, fully configurable, allowing you to fit the pump in any advanced pumping process where the unit needs to be controlled remotely and automatically.
The Blackline Pro comes in a variety of flows and pressures as well as wet-end materials allowing you to find the best pumping solution for any application.
A full aluminum gearbox and control unit housing with corrosion resistant EPD coating resulting in one of the most rugged and purposeful metering pumps on the market.
Form follows function: the angled back-lit display and single jog dial element, make this an extremely versatile and simple to use metering pump. The Blackline Pro is also available backward compatible meaning you can order as a kit and retro fit to an existing Blackline pump in the field.
Features
- 10 operating modes to fit any application – Constant, Batch, Pause-Work, Proximity, Analog mA, Analog Volt, PPM, Pause-Percent, MLQ, Pulse.
- Intuitive color coded display messages – Running, Warning and Alarm.
- Variable gearbox orientation from 0 – 90degrees.
- Backwards compatible possible installation on existing Blackline pump.
- Aluminum casing with IP65/NEMA4X enclosure protection.
- Ergonomical display clear and easy to read.
- User friendly JDS – Jog-dial selector.
BLACKLINE Series MD
- Pump Head Materials: PVDF, GFPPL, 316SS
- Turndown Ratio: 10:1 or 100:1 with the optional VFD Vector Drive
- Seat O-Rings Available: PTFE, PVC, 316SS, Incoloy 825
- Diaphragms: Rugged double-sided PTFE faced with drive side support ring
- Product Options: VFD Vector
BLACKLINE Pro
- Pump Head Materials: PVDF, GFPPL, 316SS
- Turndown Ratio: 500:1 with Blackline Pro
- Seat O-Rings Available: PTFE, PVC, 316SS, Incoloy 825
- Balls Available: Pyrex, Hastelloy C-276, 316SS
- Diaphragms: Rugged double-sided PTFE faced with drive side support ring