Looking for a quote or to discuss your needs?
You can also review the documentation for technical details and purchasing information.
EBARA Optima Submersible Pump
- Product Details
- Specifications
- Applications
EBARA Optima Submersible Pump
Stainless Steel, Single Phase, Manual or Automatic
The EBARA Optima is a compact submersible pump with a 304 stainless steel casing, outer casing and motor frame, made in Italy. It sits in the tank, sump or pit and pumps the water out, up to 150 L/min (9 m³/h) and up to 7.6 m of head, from a 0.25 kW single-phase motor.
We use these pumps for tough water and corrosive water applications, such as pH correction.
Models
- Optima M – manual: runs whenever it is switched on
- Optima MA – automatic: a float switch starts the pump as the level rises and stops it as the level falls
Both come with 5 m of cable and a 3-pin plug, ready to use.
Optima Specifications
| Item | Optima M | Optima MA |
|---|---|---|
| Operation | Manual | Automatic, with float switch |
| Motor | 0.25 kW, 2 pole, 230 V single phase, 50 Hz | |
| Full Load Current | 1.9 A | |
| Maximum Flow | 150 L/min (9 m³/h) | |
| Maximum Head | 7.6 m | |
| Head at 50 / 100 / 150 L/min | 6.3 m / 4.3 m / 1.5 m | |
| Discharge | 32 mm (1¼") female thread | |
| Maximum Liquid Temperature | 50 °C | |
| Maximum Submergence | 5 m | |
| Largest Solids | 10 mm | |
| Casing, Outer Casing, Motor Frame | 304 stainless steel | |
| Impeller | Glass-reinforced PPE thermoplastic, semi-open | |
| Shaft | 303 stainless steel | |
| Mechanical Seal | Carbon / ceramic / NBR, in an oil chamber, with upper lip seal | |
| Motor Protection | IP68, class F insulation, built-in overload protection | |
| Cable | 5 m with 3-pin plug | |
| Low Level Pumping | Down to 3 mm with the low-level suction skirt (accessory) | Minimum sump 400 × 400 mm |
| Weight | 4.2 kg | 4.4 kg |
Need a hand choosing the right pump? Call us on 1300 585 820.
The Optima suits tanks, sumps, pits and reservoirs: emptying, transferring and draining, wherever a small pump has to sit in the water. The manual Optima M can be fitted with a low-level suction skirt, which lets it pump down to 3 mm of water.
Optima Key Features
- 304 stainless steel casing, outer casing and motor frame
- Manual (M) or automatic with float switch (MA)
- Up to 150 L/min and up to 7.6 m head
- 0.25 kW, 230 V single phase, with built-in overload protection
- Dry motor, IP68, submersible to 5 m
- Mechanical seal in an oil chamber, with an upper lip seal
- Strainer passes solids up to 10 mm
- 5 m cable with 3-pin plug
- Made in Italy