Chemtrol Australia Product - Tekna TPG Solenoid Dosing Pump

Looking for a quote or to discuss your needs?

You can also review the documentation for technical details and purchasing information.

Tekna TPG Solenoid Dosing Pump

Tekna TPG Solenoid Dosing Pump

Five Pump Sizes, From 0.4 to 110 l/h

The SEKO Tekna TPG is a wall-mounted solenoid dosing pump with a keypad and display. It doses at a constant rate set by hand, or in proportion to a 4–20 mA signal or to pulses from a water meter. Five pump sizes cover 0.4 to 110 l/h and pressures up to 20 bar.

The TPG runs on 100–240 V AC, 50/60 Hz. Its stabilised power supply draws only the current each stroke needs, so dosing stays steady when the mains supply varies.

Dosing Modes

  • Constant: a set flow rate, adjusted on the keypad
  • Proportional: to a 4–20 mA signal, or to water meter pulses (1:n or n:1)
  • ppm: doses to a set concentration of the flow measured
  • Timer and batch: doses at set times, or a set quantity

A statistics menu shows how the pump has run and the chemical used, a password protects the settings, and a remote on/off input lets a controller start and stop the pump. The 603 and 800 sizes also come in a Modbus version, which talks to a PLC over RS485 (Modbus RTU).

Tekna TPG Specifications

ItemTPG 500TPG 600TPG 603TPG 800TPG 803
Flow Rate (l/h) at Pressure (bar)0.4 at 20
0.8 at 16
1.2 at 10
1.5 at 6
2.5 at 20
3.0 at 18
4.2 at 14
7.0 at 8
4.0 at 12
5.0 at 10
6.0 at 8
8.0 at 2
7.0 at 16
10 at 10
15 at 5
18 at 1
20 at 5
32 at 4
62 at 2
110 at 0
Stroke Volume (cc)0.06–0.210.35–0.970.42–0.830.39–1.001.11–6.11
Stroke Rate (strokes/min)120120160300300
Connections (mm), Suction, Discharge4/6, 4/74/6, 4/74/64/68/12
Power Consumption (W)–14–2015–2222–36–
Dimensions (mm), W × D × H119 × 145 × 231119 × 145 × 231119 × 145 × 231119 × 145 × 231119 × 149 × 231
Modbus Version (RS485, Modbus RTU)––AvailableAvailable–
Inputs4–20 mA, pulse (water meter), remote on/off
Power Supply100–240 V AC, 50/60 Hz
Pump HeadPVDF; SS316L or automatic degassing head on request (degassing not for 803)
DiaphragmPTFE
SealsFKM-B, EPDM, PTFE or FFKM
Installation KitPVDF foot filter and injection valve, 4 m PVC suction tube, 2 m PE delivery tube, wall and base bracket; PVDF-T kit on request
EnclosureReinforced polypropylene, IP65
Operating ConditionsUp to 40 °C and 90% relative humidity; indoors, out of the sun and weather

Water Treatment & Industry

The Tekna TPG is made for chemical dosing in proportion to the water treated: chlorine dosed by a water meter for potable water, inhibitor and biocide for cooling towers and boilers, and chemicals for wastewater, irrigation and swimming pools. With its PVDF head, PTFE diaphragm and ceramic balls it handles chlorine, acids, hydrogen peroxide and peracetic acid.

Key Features

  • 0.4 to 110 l/h, up to 20 bar, in five pump sizes
  • Keypad and display
  • Constant, 4–20 mA, pulse, ppm, timer and batch dosing
  • Statistics, password and remote on/off input
  • Modbus RTU version (603 and 800 sizes)
  • Stabilised power supply, 100–240 V AC
  • PVDF pump head and PTFE diaphragm; stainless steel (SS316L) or automatic degassing head on request
  • Reinforced polypropylene casing, IP65
  • Manual priming valve; installation kit and wall bracket included