Pool Water Balance Calculator

How much alkalinity increaser, calcium and salt does your pool need today? Type in the pool’s volume and today’s test readings, and this free pool calculator works out how much sodium bicarbonate, calcium chloride and pool salt to add to reach the target. Each reading is worked out on its own: fill in one, two or all three. Add the pH and water temperature, and it also tells you if the water is balanced, with the Langelier Saturation Index (LSI). Made for pool owners, service technicians and aquatic centres across Australia.

How to use it

  1. Your pool. Type how many litres the pool holds, or its length, width and depth, and choose what it is lined with.
  2. Today's readings. Test the water and type in the readings you have. Leave empty anything you did not test.
  3. What to add. See how much of each product to add and how to add it, and whether the water is balanced (LSI).

Questions about pool water balance

How much sodium bicarbonate raises the alkalinity?

1.68 g of sodium bicarbonate in 1,000 litres raises the total alkalinity by 1 ppm. A 50,000 litre pool going from 80 to 100 ppm needs about 1.7 kg.

How much calcium chloride raises the calcium hardness?

1.44 g of calcium chloride flakes (77%) in 1,000 litres raises the calcium hardness by 1 ppm, or 1.18 g of anhydrous calcium chloride (94%). A 50,000 litre pool going from 200 to 250 ppm needs about 3.6 kg of flakes.

How much salt does my pool need?

1 kg of pool salt in 1,000 litres raises the salt by 1,000 ppm. A 50,000 litre pool going from 3,500 to 4,500 ppm needs about 50 kg, two and a half 20 kg bags. Keep the salt at the level on your chlorinator’s label: most work at 4,000 to 6,000 ppm, low-salt models at 2,500 to 3,500 ppm.

What is the LSI, and what should it be?

The Langelier Saturation Index (LSI) puts the pH, water temperature, total alkalinity and calcium hardness together to tell you whether the water is balanced. Between −0.5 and +0.5 it is OK. Below −0.5 the water is corrosive and can damage the pool surface and metal; above +0.5 it can leave scale and turn cloudy. Every CHEMTROL® PC controller works it out for you, all the time, the same way.

What if my reading is above the target?

Nothing needs adding. Alkalinity well above the range is lowered with acid, added in parts with the pH tested between them. Calcium and salt stay in the water, so the way down is to replace part of it with fresh water; the calculator shows how much.

Why does the pool’s lining matter?

Concrete, tiled and pebble pools need more calcium in the water, 200 to 400 ppm, or the water draws it from the surface. Fibreglass and vinyl pools need less, 150 to 250 ppm. Some fibreglass makers ask for less again: follow your pool builder’s guide.

How accurate is the calculator?

The amounts come from the chemistry of each product and match the dose tables the pool trade publishes. How they are worked out is under “How we calculated this”. Products vary a little in strength, so add large amounts in parts and test again before the last, and call us on 1300 585 820 with any question.

Can the chlorine and pH be looked after automatically?

Yes. A CHEMTROL® pool controller measures the chlorine and pH and runs the dosing pumps for you. Work out the liquid chlorine, acid and dosing pump size your pool needs with the Pool Dosing Calculator.

How we calculated this

Each amount is the difference between today's reading and the target, times the pool's volume, times what it takes of the chemical to raise a thousand litres by 1 ppm. Readings are in ppm, the same as mg/L. Alkalinity and calcium hardness are read "as calcium carbonate", as pool test kits show them.

Total alkalinity

Raised with sodium bicarbonate (bicarb soda, sold as alkalinity increaser or buffer). 1.68 g in 1,000 L raises the alkalinity by 1 ppm, from the weights of the two chemicals: 84 g of sodium bicarbonate gives the alkalinity of 50 g of calcium carbonate. That is about 1.7 kg for a 50,000 L pool to rise 20 ppm.

Alkalinity too high is lowered with acid, not by adding anything else: 1.96 mL of 32% hydrochloric acid in 1,000 L lowers it by 1 ppm. The acid lowers the pH as well, so it is added in parts, with the pH tested between them.

Calcium hardness

Raised with calcium chloride (sold as hardness or calcium increaser). 1.11 g of pure calcium chloride in 1,000 L raises the hardness by 1 ppm. It is sold as flakes, about 77% calcium chloride, so 1.44 g, and as anhydrous granules, about 94%, so 1.18 g. That is about 3.6 kg of flakes for a 50,000 L pool to rise 50 ppm.

The target depends on the pool: 200 to 400 ppm for concrete, tiled and pebble pools, which need calcium in the water so it is not drawn from the surface; 150 to 250 ppm for fibreglass and vinyl. Some fibreglass makers ask for less: follow your pool builder's guide.

Salt

1 ppm is 1 g in 1,000 L, so 1 kg of pool salt in 1,000 L raises the reading by 1,000 ppm: about 50 kg, or two and a half 20 kg bags, for a 50,000 L pool to rise 1,000 ppm. Most salt chlorinators work at 4,000 to 6,000 ppm and low-salt models at 2,500 to 3,500 ppm. The level on your chlorinator's label comes first.

Mineral blends are made differently by each maker, and some are tested by their magnesium rather than as salt, so a mineral pool follows the dose on the pack.

Water balance: the Langelier Saturation Index (LSI)

The LSI tells whether the water holds as much calcium as it can keep dissolved: no more, no less. It is the same calculation every CHEMTROL® PC controller makes, from the pH and temperature it measures and the alkalinity and calcium hardness entered into it (see Saturation & Water Balance):

LSI = pH + TF + AF + CF − 12.1

  • TF, the temperature factor: from 0.0 at 0 °C to 1.0 at 53 °C; 0.6 at 24 °C, 0.7 at 29 °C.
  • AF, the alkalinity factor: the logarithm of the total alkalinity, 2.0 at 100 ppm.
  • CF, the calcium factor: the logarithm of the calcium hardness less 0.4, 1.6 at 100 ppm and 2.0 at 250 ppm.

These are the values of the standard Langelier tables. Between −0.5 and +0.5 the water is OK. Below −0.5 it is corrosive: it draws calcium from concrete, grout and pebble, and corrodes metal. Above +0.5 it is scaling: calcium settles as scale on tiles, in heaters and on chlorinator cells, and the water can turn cloudy. The pH moves the LSI the most: 0.1 of pH moves it by 0.1. For example, pH 7.5 at 28 °C, alkalinity 100 ppm and calcium 250 ppm: 7.5 + 0.68 + 2.00 + 2.00 − 12.1 = +0.08, OK.

When a reading is above the target

Calcium and salt stay in the water: no chemical takes them out. The way down is to replace part of the water. To bring 500 ppm down to 400 ppm, a fifth of the water is replaced, as a fifth of the reading has to go. We take the top-up water as having little of either; hard tap water takes more.

Where the figures come from

  • The amounts: from the molar masses of sodium bicarbonate (84.0), calcium chloride (111.0), its flake form with water (147.0), hydrochloric acid (36.5) and calcium carbonate (100.1), and checked against the dose tables the pool trade publishes.
  • Total alkalinity for public pools, 80 to 200 mg/L: NSW Health, public swimming pool and spa pool guidelines.
  • Calcium hardness by pool surface, and salt levels: Australian chlorinator and pool chemical makers' guides.

These are amounts to plan with. Add large amounts in two or three parts, test the water again before the last, and call us on 1300 585 820 with any question.