Chemtrol Australia Product - IK-1600 Series Coolant Chemistry Analyzer for AI Critical CDUs

Looking for a quote or to discuss your needs?

You can also review the documentation for technical details and purchasing information.

IK-1600 Series Coolant Chemistry Analyzer for AI Critical CDUs

Product Details
Specifications
Display & Integration
Video

IK-1600 Series Coolant Chemistry Analyzer for AI Critical CDUs

Complete Coolant Monitoring, with Its Own Touch Screen

The Pyxis IK-1600 is a factory-built stainless steel analyser panel for data centre coolant distribution units (CDUs). It measures pH, conductivity, turbidity, glycol concentration and temperature continuously, and shows them on a 7-inch colour touch screen that also logs the data, handles calibration and raises alarms.

The panel arrives assembled, wired, tested and calibrated: connect the sample line and power, and it is running.

On the Panel

ST-710SS pH sensor
ST-722 conductivity sensor
ST-730SS-T turbidity sensor
RT-100 Series PRISM™ glycol refractometer
ST-009-03 three-sensor flow cell
UC-80-PLUS touch screen display and data logger

Two versions: the IK-1600, with the RT-100 refractometer (its own display and logging), and the IK-1600A, with the RT-110L refractometer. For a panel without the touch screen, see the IK-1500 sensor module.

IK-1600 Series Specifications

Item	IK-1600	IK-1600A
Part Number	40704	40470
Glycol Sensor	RT-100 (with its own display and logging)	RT-110L
Other Sensors	ST-710SS pH, ST-722 conductivity, ST-730SS-T turbidity (infrared), on an ST-009-03 flow cell
Ranges	pH 0–14; conductivity 0.02–10,000 µS/cm; turbidity 0–100 NTU; glycol (ethylene or propylene) 0–100%; temperature 0–100 °C
Precision	pH ±0.01 or 1%; conductivity ±0.2 µS/cm or 1% (below 500 µS/cm); turbidity ±0.1 NTU; glycol ±0.1%; temperature ±1%
Display	UC-80-PLUS 7-inch colour touch screen, data logger
Outputs	8 × 4–20 mA, Modbus RTU and TCP; 2 × 24 V DC relays
Power	96 – 240 V AC, 50 – 60 Hz
Sample Temperature	4 – 49 °C
Maximum Sample Pressure	6.9 bar
Sample Inlet / Outlet	¼" OD Swagelok® compression
Suggested Flow Rate	100 – 2,000 mL/min
Sensor Response	T95 ≤ 5 seconds; reading every 4 seconds
Wetted Materials	316L SS, fluoroelastomer, EPDM, PEEK, CPVC, POM, quartz, sapphire
Panel	Stainless steel; about 8 – 12 kg
Protection	IP67 sensors
Approvals	CE, RoHS
Warranty	Sensors 13 months; electrode 6 months

UC-80-PLUS Touch Screen

7-inch colour industrial touch screen
Live readings, data logging, calibration and sensor diagnostics
Stores up to one million readings and events; USB download
Two 24 V DC relays for alarms
Power: 96 – 240 V AC, 50 – 60 Hz, 60 W

Connects to Your Systems

The display passes every reading on through eight 4–20 mA outputs and Modbus RTU and TCP, to the CDU controls, PLC, BMS, EPMS or DCIM platform. Each sensor also has its own 4–20 mA and RS-485 Modbus outputs.