Looking for a quote or to discuss your needs?
You can also review the documentation for technical details and purchasing information.
ProAlert® 2 Leak Alarm
- Product Details
- Specifications
- Applications & Features
ProAlert® 2 Leak Alarm
A Bright Red Light and a Loud Alarm for Any Leak Sensor
The Icon Process Controls ProAlert® 2 gives a leak, level or flow alarm a high-intensity red light and a 108 dB sounder. A sensor wires straight to it, or a controller’s relay sets it off. The silence button quiets the sounder while the light stays on until the fault is cleared, and a test button checks it. It comes pre-wired, in a NEMA 4X enclosure for the wall, a panel or a pole.
Three versions:
- PA223 – input from an NPN or PNP sensor or a dry contact
- PA223-PR – adds a 10 A relay output, to stop a pump or tell a PLC
- PA223-LD – a built-in leak detection module for LDC-G cable: a complete cable leak alarm in one box
A blue lens is available (suffix -B).
ProAlert 2 Leak Alarm Specifications
| Item | ProAlert® 2 |
|---|---|
| Inputs | NPN or PNP sensor, or dry contact; LDC-G cable (PA223-LD) |
| Alarm | High-intensity red light, 108 dB sounder |
| Relay output | 10 A (PA223-PR) |
| Buttons | Silence (light stays on), test |
| Power supply | 24 V DC, or 100–240 V AC with an adapter |
| Sensor supply | 12–14 V DC |
| Enclosure | NEMA 4X, ABS and polycarbonate |
| Mounting | Wall, panel or pole |
| Dimensions | 210 × 144 × 144 mm |
| Weight | 0.95 kg |
| Operating temperature | −10 to +50 °C |
Applications
- Leak alarms with LD, LDS or PES sensors
- A local alarm for LeakDtec® and LeakPoint® controllers
- Cable leak alarm in one box (PA223-LD)
- Level and flow alarms
Key Features
- High-intensity red light (blue option)
- 108 dB audible alarm
- Silence and test buttons
- Relay output option
- Pre-wired, ready to install
- NEMA 4X enclosure
