Chemtrol Australia Product - LS-202 & LSP Series Level Sensors

Looking for a quote or to discuss your needs?

You can also review the documentation for technical details and purchasing information.

LS-202 & LSP Series Level Sensors

Pyxis LS-202 & LSP Series Level Sensors

Continuous Tank Level, with Display, Bluetooth® and 4–20 mA

Pyxis makes two kinds of level sensor for chemical and water tanks. The LS-202 measures from above, by ultrasound, and never touches the liquid. The LSP Series hangs in the tank and measures the level from the pressure of the liquid above it. Both give a continuous level reading, set up in minutes on the uPyxis® app.

Pyxis LS-202Ultrasonic level sensor
LS-202
Ultrasonic
Pyxis LSP-100/101316L stainless steel level sensor
LSP-100/101
316L stainless steel
Pyxis LSP-200/201PVC level sensor
LSP-200/201
PVC
Pyxis LSP-300/301PVDF level sensor
LSP-300/301
PVDF

LS-202 Ultrasonic Level Sensor

The LS-202 screws into the top of the tank and reads the level from 0.1 to 2.7 m without touching the liquid, so dirty, sticky, scaling or corrosive liquids cannot foul it. It works in open or closed tanks. It has a display with four push-buttons, 4–20 mA and RS-485 Modbus outputs, and Bluetooth®. It runs on four AA batteries or 24 V DC, and its data logger keeps up to six months of level readings.

LSP Series Pressure Level Sensors

The LSP sensors measure up to 10 m of liquid, on a 10 m PTFE cable. Choose the transducer to suit the liquid:

  • LSP-100 and LSP-101 – 316L stainless steel
  • LSP-200 and LSP-201 – PVC
  • LSP-300 and LSP-301 – PVDF

The LSP-100, LSP-200 and LSP-300 have a display with four push-buttons and keep up to six months of level data. They run on four AA lithium batteries or 24 V DC, so they suit tanks with no power or signal wiring nearby. The LSP-101, LSP-201 and LSP-301 run on 24 V DC only, with no display or data storage, and give a 4–20 mA signal to any controller: a lower-cost choice with the same accuracy. Every LSP model is set up by Bluetooth®, and none needs liquid in the tank to be configured.

Accessories

  • LSP Series wall mounting bracket
  • LSP Series AA lithium batteries, pack of four
  • Waterproof cable with adapter, 3 m, and extension cables of 7.6, 15 and 30 m

LS-202 & LSP Series Specifications

ItemLS-202
Ultrasonic
LSP-100, LSP-200, LSP-300
Pressure, with display
LSP-101, LSP-201, LSP-301
Pressure, no display
Part Number5400254005, 54009, 5401054012, 54013, 54014
Measuring PrincipleUltrasonic, non-contactSubmersible pressure transducer
TransducerPVDF316L stainless steel (LSP-100/101), PVC (LSP-200/201), PVDF (LSP-300/301)
Range0.1–2.7 m0–10 m of water
Accuracy±0.15% of range±0.2% of range
Stability–±0.2% of upper range limit per year
Resolution0.5 mm
Dead Zone10 cm–
Power Supply4 × AA batteries or 24 V DC, 2.0 W max.4 × AA Li/SOCl2 batteries or 24 V DC, 2 W24 V DC, 2 W
Outputs4–20 mA, RS-485 Modbus, Bluetooth® 5.04–20 mA and Bluetooth® 5.0 (10 m line of sight)
Display1.3" OLED with four push-buttonsNone
Data LoggingUp to 6 months, one reading every 30 minutes6 months (one reading an hour)None
Measurement IntervalContinuous (5 readings per second), configurableConfigurableContinuous
ConfigurationuPyxis® app
Cable3 m waterproof cable with adapter10 m submersion cable, PTFE
Installation1" MNPT1" NPT display threading; 1.5" NPT transducer diameter
Pressure0.1–0.2 MPa–
Temperature-10 to 60 °C working; -20 to 70 °C storage
EnclosurePolycarbonate, IP67Polycarbonate, IP66
Transducer Rating–IP68
Dimensions172 mm long, 80 mm diameter–
Weight550 g1400 g
ApprovalsCE, RoHS

Need a hand choosing the right sensor? Call us on 1300 585 820.

These sensors measure water, chemical, process liquid, waste water and oil tanks: chemical storage and day tanks for dosing systems, cooling tower and boiler chemical tanks, and water tanks. The LS-202 suits liquids that would foul a sensor in contact with them. The LSP Series suits tanks where an ultrasonic sensor cannot see the surface, and fits through the top of the tank or on its wall bracket.

LS-202 & LSP Series Key Features

  • Continuous level measurement, set up in minutes on the uPyxis® app
  • LS-202: non-contact ultrasonic, 0.1–2.7 m, ±0.15% of range
  • LSP Series: submersible pressure sensors, 0–10 m, ±0.2% of range
  • Transducers in PVDF (LS-202, LSP-300/301), 316L stainless steel (LSP-100/101) or PVC (LSP-200/201)
  • 4–20 mA output and Bluetooth® 5.0 on every model; RS-485 Modbus on the LS-202
  • Battery or 24 V DC power, with display and six months of data logging (LS-202, LSP-100/200/300)
  • 24 V DC models without display, for a lower cost (LSP-101/201/301)
  • No liquid needed in the tank to configure an LSP sensor