Looking for a quote or to discuss your needs?
You can also review the documentation for technical details and purchasing information.
Invikta Solenoid Dosing Pump
- Product Details
- Specifications
- Pools & Water Treatment
Invikta Solenoid Dosing Pump
Simple, Reliable Dosing for Everyday Water Treatment
The SEKO Invikta is a compact, microprocessor-controlled solenoid dosing pump for straightforward dosing jobs: swimming pools and spas, cooling towers, reverse osmosis systems and car washes, or as a dosing module built into larger equipment.
One dial sets the dose from zero to 100% of the pump’s output, and an LED shows at a glance whether the pump is running or stopped. It mounts on its wall bracket and comes with an installation kit.
Models
- KCS 620: low-noise version, 0.2 l/h at 1 bar
- KCS 630: low-flow version, 0.6 l/h at 7 bar
- KCS 632: 2 l/h at 7 bar
- KCS 633: 5 l/h at 5 bar
Long-Life Liquid End
The pump head is PVDF-T, with ceramic ball valves and a PTFE diaphragm that SEKO guarantees for five years. These parts stand up to the chemicals used in water treatment, so the pump needs very little maintenance. A priming tap on the head makes start-up easy, and again whenever the chemical drum runs dry.
Invikta Specifications
| Item | KCS 620 | KCS 630 | KCS 632 | KCS 633 |
|---|---|---|---|---|
| Version | Low-noise | Low-flow | Standard | Standard |
| Maximum Pressure | 1 bar | 7 bar | 7 bar | 5 bar |
| Maximum Flow Rate | 0.2 l/h | 0.6 l/h | 2 l/h | 5 l/h |
| Stroke Volume | 0.17 cc | 0.10 cc | 0.33 cc | 0.52 cc |
| Stroke Rate | 20 strokes/min | 100 strokes/min | 100 strokes/min | 160 strokes/min |
| Control | Constant dosing, set by dial from 0 to 100%; status LED | |||
| Power Supply | 230 V AC, 50 Hz (24 V AC on request) | |||
| Power Consumption | 15 W | |||
| Connections | 4/6 mm tube | |||
| Wetted Materials | PVDF-T pump head, ceramic balls, PTFE diaphragm (guaranteed for five years) | |||
| Seals | FKM-B or EPDM | |||
| Installation Kit | Foot filter, injection valve, 4 m PVC suction tube, 2 m PE delivery tube; detergent and rinse kits on request | |||
| Enclosure | Polypropylene, IP65 | |||
| Mounting | Wall bracket | |||
| Dimensions | 86 × 116 × 175 mm (W × D × H) | |||
| Weight | 2.5 kg | |||
| Operating Conditions | Up to 40 °C and 90% relative humidity; indoors, out of the sun and weather | |||
Pools, Spas & Water Treatment
Invikta suits sites that need steady, constant dosing without complicated controls: chlorine and acid for swimming pools, the quiet KCS 620 for spas where the pump sits close to bathers, biocide or inhibitor for cooling towers, antiscalant for reverse osmosis plants, and detergent and rinse aid for car washes, with special installation kits on request.
Key Features
- Up to 5 l/h, and up to 7 bar
- Dose set by dial, from 0 to 100%
- Status LED: running or stopped
- PVDF-T pump head, ceramic balls and PTFE diaphragm, guaranteed for five years
- FKM-B or EPDM seals
- Polypropylene casing, IP65
- Priming tap on the pump head
- Wall bracket and installation kit
- 230 V AC; 24 V AC on request
