Chemtrol Australia Product - SEKO Multifunction Valve (MFV)

Looking for a quote or to discuss your needs?

You can also review the documentation for technical details and purchasing information.

SEKO Multifunction Valve (MFV)

SEKO Multifunction Valve (MFV)

Steady Dosing and Safe Pressure, in One Small Valve

The SEKO multifunction valve fits straight onto the delivery connector of a SEKO solenoid dosing pump. In one compact PVDF body it holds the pump at a steady back-pressure, stops chemical siphoning through the pump, and relieves the pressure safely if the delivery line is blocked.

A solenoid pump doses most accurately when every stroke pushes against the same pressure. A low or changing delivery pressure, especially between 0 and 1 bar, upsets the dose; the valve’s adjustable back-pressure keeps each stroke the same. Its safety relief, adjustable up to 18 bar, protects the pump and the pipework from overpressure.

Versions

  • For 4 × 6 mm tube
  • For 8 × 12 mm tube
  • With a wall fixing bracket, for 4 × 6 or 8 × 12 mm tube

Each version comes with FPM or EPDM seals, to suit the chemical being dosed. The diaphragms are PTFE in every version.

MFV Specifications

Item4 × 6 mm Tube8 × 12 mm TubeWith Wall Fixing Bracket
Code, FPM SealsEM99106740EM99106742EM99106991
Code, EPDM SealsEM99106741EM99106743EM99106992
Tube Connection4 × 6 mm8 × 12 mm4 × 6 or 8 × 12 mm
BodyPVDF
DiaphragmsPTFE
SealsFPM or EPDM
Safety Relief SettingAdjustable, 0–18 bar
Back-Pressure SettingAdjustable, 0–5 bar
MountingDirectly on the pump's delivery connector, held by a ring nut
Bleed LineBack to the chemical tank, above the highest liquid level
SuitsSEKO solenoid dosing pumps

Check that the seals and the chemical being dosed are compatible before use. Need a hand choosing? Call us on 1300 585 820.

Fit the valve directly on the pump’s delivery connector, turn it to the position that suits the installation, then tighten the ring nut. Connect the delivery tube to the injection point, and run the bleed tube back to the chemical tank, keeping its end above the highest liquid level.

MFV Key Features

  • Back-pressure, safety relief and anti-siphon protection in one valve
  • Adjustable back-pressure, 0–5 bar, for steady and accurate dosing
  • Adjustable safety relief, 0–18 bar, protects the pump and the delivery line
  • Back-pressure stops the chemical siphoning through the pump
  • Mounts directly on the pump and turns to suit the installation
  • Bleed line returns the chemical safely to the tank
  • PVDF body and PTFE diaphragms, with FPM or EPDM seals
  • For 4 × 6 mm or 8 × 12 mm tube, or with a wall fixing bracket