Active Chlorine Sensor for Process Water
Looking for a quote or to discuss your needs?
- Product Details
Active chlorine (hypochlorous acid) HOCl
These active chlorine sensors are especially used for the analysis of process water (without surfactants). These sensors can measure a high content of up to 200 mg/l of chlorine.
Technical Specification
| Applications | Process Water Charged water Polluted water |
|---|---|
| Measuring range | 0.5 – 100 ppm (PPMAC100) 0.5 – 200 ppm (PPMAC200) |
| pH range | 5.5 – 8 pH |
| Temperature range | 5 – 50°C (with temperature compensation) |
| Disturbance by other oxidants | Free from isocyanuric acid |
| Maximum pressure and flow rate | 1 bar Mini : 20 l/h Maxi : 100 l/h Recommended : 30 l/h |
| Start-up time and final calibration | First calibration after 2 hours After 24 hours |
| Membrane lifetime | Approximately 1 year (depending on water quality/concentration) |
| Material and type of protection | PVC black IP 65 |
| Power supply and output signal | 16 – 24 VDC 4-20 mA |