Active Chlorine Sensor for Hot Water Systems

Chemtrol Australia Product - Active Chlorine Sensor for Hot Water Systems

Looking for a quote or to discuss your needs?

Special active chlorine measurement for hot water systems

Active amperometric chlorine sensors (hypochlorous acid) HOCl are used to measure the hypochlorous acid present in hot water systems and are specially adapted for measurements under pressure (up to 8 bars). These probes are generally used for monitoring chlorination against legionella.

Technical Specification

Applications Process Water
Charged water
Polluted water
Measuring range 0 – 2 ppm (PPMAC002HP)
0 – 10 ppm (PPMAC010HP)
pH range 5 – 9 pH
Temperature range 40 – 50°C (with temperature compensation)
Disturbance by other oxidants Chlorine dioxide (4x)
Chlorites
Ozone (9x)
Maximum pressure and flow rate 8 bar
Mini : 20 l/h
Maxi : 100 l/h
Recommended : 30 l/h
Start-up time and final calibration First calibration after 2 hours
After 24 hours
Membrane lifetime Approximately 1 year (depending on water quality/concentration)
Material and type of protection PPE Beige
IP 65
Power supply and output signal 10 – 25 VDC
4-20 mA